Asus E500-PIB Uživatelská příručka Strana 84

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 87
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 83
80 • Schlage • Schlage Utility Soware User's Guide
Create a Device TemplateAppendix D: Device Template
Create a Device Template
1 Connect the HHD to the device with desired properties.
Î If the device properties have not been programmed, configure the device properties as
desired. Refer to AD-Series Lock Properties on page 23, or CO-Series Lock Properties
on page 49.
2 Select Device Options.
3 Select Lock Properties for the connected device.
4 Select the Edit or Reader tab.
5 Select Device Template at the bottom of the screen.
6 Select Save From Device to create a Device Template file from the properties of this device.
7 Enter a name for the Device Template file.
Î The name should describe the device configuration this Template is intended to work with
and clearly identify the hardware configuration. (Example: AD200-PRK main entrances.)
8 Tap OK to save. The SUS will display the location of the saved Template file.
Copy a Saved Device Template
1 Connect the HHD to the device that will receive the saved properties settings.
Î Be sure that the receiving device is of the same hardware configuration as that of the
source of the Device Template. (See Prerequisites on page 79 for more information.)
2 Select Device Options.
3 Select Lock Properties for the connected device.
4 Select the Edit or Reader tab.
5 Select Device Template at the bottom of the screen.
6 Select Save To Device to copy and save a Device Template file to the connected device.
7 Select the Device Template file name.
Î If the Device Template name is not available, check to be sure that the receiving device is
of the same hardware configuration as that of the source of the Device Template. (See
Prerequisites on page 79 for more information.)
8 Tap OK to save.
9 Tap YES on the confirmation window, then tap OK again to finish.
Î Saving a Device Template file to a PIM or PIB will require re-linking of all previously linked devices
When naming the
Device Template, use
normal Windows OS
naming conventions.
Before copying, a
Device Template
file must be saved
to the SUS, /My
Documents/ and
must be a hardware
configuration match
with the receiving
device.
The device template
file (.dtf) can be
shared among devices
by copying it from
the my documents
folder of one of the
handhelds, saving it
to a computer, and
then copying it to the
my documents folder
of any handhelds that
need the template.
Zobrazit stránku 83
1 2 ... 79 80 81 82 83 84 85 86 87

Komentáře k této Příručce

Žádné komentáře