Asus E500-PIB Uživatelská příručka stáhnout pdf (Strana 62)

58 • Schlage • Schlage Utility Soware User's Guide

Error CodesTroubleshooting

Error Codes

No. Error Solution

E304 Retrieving lock properties failed The HHD was disconnected from the lock before the

Retrieving Properties process was complete. The HHD

must remain connected to the lock until the process is

complete.

E305 Retrieving PIB properties failed The HHD was disconnected from the PIB300 before

the Retrieving Properties process was complete. The

HHD must remain connected to the PIB300 until the

process is complete.

E306 Retrieving PIM properties failed The HHD was disconnected from the PIM400/401 or

Legacy PIM before the Retrieving Properties process

was complete. The HHD must remain connected to

the PIM400/401 or Legacy PIM until the process is

complete.

E307 Retrieving door properties failed The HHD was disconnected from the Door before the

Retrieving Properties process was complete. The HHD

must remain connected to the Door until the process is

complete.

E400 Data ﬁles for French language are

missing

When attempting to change the language to French,

the French language ﬁles cannot be found. Contact

customer support.

E401 Data ﬁles for Spanish language are

missing

When attempting to change the language to Spanish,

the Spanish language ﬁles cannot be found. Contact

customer support.

E500 Relock Delay and Prop Delay should be

greater than Zero

The relock delay and prop delay must be greater than

zero (0). Change the delay(s) to a value greater than

zero (0).

E501 None of the properties are changed The Save menu item was tapped but no values were

changed. Change at least one value, or tap back to

cancel.

E502 Saving properties failed The HHD was disconnected from the lock before the

saving properties function was complete. The HHD

must remain connected to the lock until the saving

properties process is complete. OR

No valid programming credential was presented to

the lock. A valid programming credential must be

presented before the properties can be saved.

E503 The Unique ID should be in range 0 -

65535

The PIM400 or Legacy PIM address entered was

greater than 65535. Enter a value less than 65535 and

try again.

E504 The Unique ID should be in range

1-65534

The PIM400 or Legacy PIM address is incorrect. Enter a

value less than 65535 and try again.

E505 The RS485 address should be in range

0- 254

The RS485 address entered was greater than 254.

Enter a value less than 254 and try again.

E506 The Relock Delay value should be in

range 0- 255

The Relock Delay entered was greater than 255. Enter a

value less than 255 and try again.

E507 Reserved address 170 cannot not be

used for RS485 address

The RS485 address entered is incorrect. Enter a value

less than 254 and different than 170.

E508 Difference between high door and low

door cannot be equal or greater than 16

While setting the addresses of the Low and High doors

make sure that the difference between both is less

than 16.

E509 High door cannot be lesser than low

address

The address of the High door MUST be greater than the

Low door.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 86 87

Komentáře k této Příručce

Žádné komentáře

Asus E500-PIB Uživatelská příručka Strana 62

Komentáře k této Příručce