Asus E500-PIB Uživatelská příručka stáhnout pdf (Strana 50)

46 • Schlage • Schlage Utility Soware User's Guide

Supported Locks

All chassis for the following models are supported.

CO-Series Locks

CO-200 CO-220 CO-250

Couple HHD to Lock

CO-Series locks can be coupled, or authenticated, with the HHD. This provides enhanced security by

ensuring that the lock will only communicate with HHD to which it has been coupled. Once the lock

has been coupled, the coupling password is passed to the device from the HHD during programming.

Each lock will retain only one coupling password; therefore, only one HHD can be coupled with the

lock.

Î HHDs with the same coupling password can program the same devices. Each HHD with a

different coupling password must be coupled with each device it will program.

1 Connect the HHD to the lock using the HH-USB cable.

2 Insert the mechanical key into the lock. Then rotate and hold the key.

3 Continue holding the key and press the Schlage button three (3) times. Then release the key.

4 On the HHD, select Device Options.

5 On the HHD, select Couple HHD to Device.

6 When Coupling is successful, a message will be displayed on the screen.

Program a Lock

1 Connect the HHD to the lock or controller and establish communication between the HHD and

the device.

2 Select Device Options.

3 Select Program Lock.

4 Select the door ﬁle that should be associated with the lock or controller.

Î Door ﬁles are downloaded to the HHD when synchronized with the access control soware.

5 Select OK.

This function works

with CO-Series

devices only.

The HHD will use

a default Coupling

Password (123456)

when coupling with a

device. The Coupling

Password should be

changed to provide

increased security

for your locks. See

Coupling Password

on page 14 for

more information.

CO-Series Locks

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 86 87

Žádné komentáře

Asus E500-PIB Uživatelská příručka Strana 50