Asus Terminator 2 Barebone System T2-R Uživatelský manuál Strana 35

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 120
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 34
35
ASUS Terminator 2 barebone system
2.9 Installing a hard disk drive
The system supports one UltraATA133 IDE hard disk drive (HDD).
To install a hard disk drive:
1. Locate the HDD tray lock screw
on the other side of the chassis.
2. Remove the lock screw with a
Philips screw driver. Keep the
screw for later use.
4. Place a hard disk drive on the
tray with its bottom on the open
side. Align the HDD and HDD
tray screw holes.
5. Secure the HDD with four
screws.
3. Slide the HDD tray outward until
its slots are released from the
chassis hooks.
1
2
Tray locks
Tray locks
Configure your hard disk drive as Master device before connecting the
IDE cable and power plug. Refer to the HDD documentation on how to
set the drive as a Master device.
Lock slots
3
4
5
5
Zobrazit stránku 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 119 120

Komentáře k této Příručce

Žádné komentáře