Asus TS100-E5/PI4 Uživatelský manuál stáhnout pdf (Strana 45)

3-5ASUS TS100-E5/PI4

2. RAID controller selection (3-pin RAID_SEL1)

This jumper allows you to select the RAID conguration utility to use when you

create disk arrays. Place the jumper caps over pins 1–2 if you want to use the

LSI Logic Embedded SATA RAID Setup Utility (default); otherwise, place the

jumper caps to pins 2–3 to use the Intel

Matrix Storage Manager.

P5BV-C/4L/TS100-E5

RAID_SEL1 Setting

2 31 2

RAID_SEL1

LSI RAID ROM

(Default)

INTEL RAID ROM

3. Force BIOS recovery setting (3-pin RECOVERY1)

This jumper allows you to quickly update or recover the BIOS when it gets

corrupted.

P5BV-C/4L/TS100-E5

BIOS Recovery Setting

RECOVERY1

(Default)

Normal BIOS recovery

1 2

2 3

To update the BIOS

1. Prepare a oppy disk that contains the latest BIOS for the motherboard

(xxxx-xxx.ROM) and the AFUDOS.EXE utility.

2. Set the jumper to pins 2–3.

3. Insert the oppy disk then turn on the system to update the BIOS.

4. Shut down the system.

5. Set the jumper back to pins 1–2.

6. Turn on the system.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 165 166

Žádné komentáře

Asus TS100-E5/PI4 Uživatelský manuál Strana 45