Asus DSBF-D16/SAS Uživatelský manuál Strana 144
- Strana / 202
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
5-30 Chapter 5: RAID conguration
5.3 Intel
®
Matrix Storage Manager
Option ROM Utility
The Intel
®
Matrix Storage Manager Option ROM utility allows you to create RAID 0,
RAID 1, RAID 0+1, and RAID 5 set(s) from Serial ATA hard disk drives.
To enter the Intel
®
Matrix Storage Manager Option ROM Utility:
1. Turn on the system after installing all Serial ATA hard disk drives.
2. During POST, press <Ctrl+I> to display the utility main menu.
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID setup screens shown in this section are for reference only and
may not exactly match the items on your screen due to the controller version
difference.
Intel(R) Matrix Storage Manager Option ROM v5.6.2.1002 ESB2 wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
None dened.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 XXXXXXXXXXX XXXXXXXX XX.XXGB
Non-RAID Disk
1 XXXXXXXXXXX XXXXXXXX XX.XXGB
Non-RAID Disk
2 XXXXXXXXXXX XXXXXXXX XX.XXGB Non-RAID Disk
3 XXXXXXXXXXX XXXXXXXX XX.XXGB Non-RAID Disk
[
↑↓
]-Select [ESC]-Exit [ENTER]-Select Menu
The utility supports maxium four hard disk drives for RAID congurration.
- Motherboard 1
- August 2007 2
- First Edition V1 2
- Contents 3
- Safety information 8
- About this guide 9
- Typography 10
- (continued on the next page) 11
- Product 15
- 1.1 Welcome! 17
- 1.2 Package contents 17
- 1.3 Serial number label 17
- 1.4 Special features 18
- Hardware 21
- 2.1 Before you proceed 23
- 2.2 Motherboard overview 24
- ASUS DSBF-D16 Series 2-3 25
- CEK spring screw hole 26
- ASUS DSBF-D16 Series 2-5 27
- 2.2.4 Motherboard layouts 28
- DSBF-D16 model 29
- (DSBF-D16 model only) 30
- 2.3.1 Installing the CPU 32
- Notes on Intel 34
- Hyper-Threading Technology 34
- DO NOT forget to connect 36
- 112 Pins128 Pins 37
- Rank population 38
- Memory Mirroring 39
- ASUS DSBF-D16 Series 2-19 41
- Memory Sparing 42
- Two DIMMs per channel 43
- Three DIMMs per channel 43
- 2.4.4 Installing a DIMM 45
- 2.4.5 Removing a DIMM 45
- ASUS DSBF-D16 Series 2-25 47
- Make sure the cables pass 47
- Top cover clamp 48
- 2.5 Expansion slots 49
- 2.5.3 Interrupt assignments 50
- DSBF-D16/SAS only 51
- 2.5.6 DDR2 SODIMM socket 52
- (Default) 53
- Clear CMOS 53
- DSBF-D16 Series VGA setting 54
- (82563EB) 55
- (82573L) 55
- Normal BIOS Recovery 57
- 2.7 Connectors 58
- 2.7.2 Internal connectors 59
- +3.3V Remote Sense 64
- I2C_7_DATA# 64
- I2C_7_CLK# 64
- 24-pin Power Connector 65
- +12V DC GND 65
- ASUS DSBF-D16 Series 2-45 67
- AUX_PANEL1 67
- Powering up 69
- Phoenix BIOS beep codes 71
- 3.2 Turning off the computer 72
- BIOS setup 73
- DOS environment 75
- XP environment 75
- Utility 76
- 4-4 Chapter 4: BIOS setup 78
- ASUS DSBF-D16 Series 4-5 79
- 4.2 BIOS setup program 80
- 4.2.2 Menu bar 81
- 4.2.1 BIOS menu screen 81
- 4.2.4 Menu items 82
- 4.2.5 Sub-menu items 82
- 4.2.6 Conguration elds 82
- 4.2.3 Legend bar 82
- 4.2.7 Pop-up window 83
- 4.2.8 General help 83
- 4.3 Main menu 84
- S-ATA Conguration 85
- Serial ATA [Enabled] 86
- Native Mode Operation [Auto] 86
- SATA Port 1/2/3/4 87
- 4.3.6 System Information 88
- Processor Information 89
- System Memory Information 89
- 4.4 Advanced menu 90
- ASUS DSBF-D16 Series 4-17 91
- The conguration options of 91
- Frequency Ratio 91
- 4-18 Chapter 4: BIOS setup 92
- • The appearance of the 92
- Intel EIST support 92
- ASUS DSBF-D16 Series 4-19 93
- 4.4.2 Chipset Conguration 94
- 4.4.3 PCI Conguration 96
- USB Function [Enabled] 97
- USB 2.0 Controller [Enabled] 97
- Legacy USB Support: [Enabled] 97
- COM1 port: [Enabled] 98
- COM2 port: [Enabled] 98
- 4.4.6 ACPI Conguration 99
- 4.4.7 Power On Conguration 100
- 4.4.8 Hardware Monitor 101
- 4-28 Chapter 4: BIOS setup 102
- 5100 and 5300 series 102
- ASUS DSBF-D16 Series 4-29 103
- 4.5 Server menu 104
- Com Port Address 105
- item to 105
- ASUS DSBF-D16 Series 4-31 105
- 4.5.2 DMI Event Logging 106
- 4.6 Security menu 107
- Password Check [Setup] 108
- Password Lock Mode [Disabled] 108
- Flash Write [Enabled] 108
- 4.7 Boot menu 109
- 4.7.2 Boot Features 110
- 4.8 Exit menu 111
- Discard Changes 112
- Load Setup Defaults 112
- Chapter summary 114
- 5.1 Setting up RAID 115
- Setup Utility 117
- Using Easy Conguration 118
- ASUS DSBF-D16 Series 5-5 119
- Logical 120
- ASUS DSBF-D16 Series 5-7 121
- Using New Conguration 123
- 5.2.2 Creating a RAID 10 set 124
- ASUS DSBF-D16 Series 5-11 125
- ASUS DSBF-D16 Series 5-13 127
- ASUS DSBF-D16 Series 5-15 129
- Using the Initialize command 131
- Using the Objects command 133
- ASUS DSBF-D16 Seriies 5-21 135
- ASUS DSBF-D16 Seriies 5-23 137
- Using the Check Consistency 138
- ASUS DSBF-D16 Seriies 5-25 139
- ASUS DSBF-D16 Seriies 5-27 141
- ASUS DSBF-D16 Seriies 5-29 143
- When you enable 143
- WriteCache 143
- 5.3 Intel 144
- Matrix Storage Manager 144
- Option ROM Utility 144
- ASUS DSBF-D16 Series 5-31 145
- ASUS DSBF-D16 Series 5-33 147
- ASUS DSBF-D16 Series 5-35 149
- 5.3.5 Deleting a RAID set 150
- 5.3.7 Exiting the Intel 151
- 5.4 Global Array Manager 152
- (DSBF-D16/SAS model only) 153
- Creating RAID array 156
- ASUS DSBF-D16 Series 5-43 157
- Create and save new array? 158
- Cancel Exit 158
- Overview 159
- ASUS DSBF-D16 Series 5-47 161
- 5.5.4 Managing Arrays 162
- ASUS DSBF-D16 Series 5-49 163
- Managing hot spares 164
- Synchronizing the array 165
- Activating an array 166
- Deleting an array 166
- 5.5.5 Viewing SAS topology 167
- Selecting a boot disk 168
- 5.5.6 Global Properties 169
- Boot Information Display Mode 170
- Support Interrupt 170
- Restore Defaults 171
- 6.1 RAID driver installation 175
- ASUS DSBF-D16 Series 6-3 177
- 2000/2003 Server OS 178
- ASUS DSBF-D16 Series 6-5 179
- To an existing Windows 180
- ASUS DSBF-D16 Series 6-7 181
- Enterprise 182
- ASUS DSBF-D16 Series 6-9 183
- ASUS DSBF-D16 Series 6-11 185
- ASUS DSBF-D16 Series 6-13 187
- 6.3 LAN driver installation 188
- ASUS DSBF-D16 Series 6-15 189
- 9. When nished, press 191
- to continue 191
- 6.3.2 Red Hat 193
- 6.4 VGA driver installation 194
- ASUS DSBF-D16 Series 6-21 195
- installation 196
- 6.5.4 Utilities menu 197
- 6.5.5 Contact information 197
- Reference information 199
- Appendix summary 200
- ASUS DSBF-D16 Series A-1 201
Související produkty a manuály pro Počítačový hardware Asus DSBF-D16/SAS
Počítačový hardware Asus Z8NA-D6 Uživatelský manuál
(168 stránky)
(168 stránky)
Počítačový hardware Asus P7F-C/SAS Uživatelský manuál
(180 stránky)
(180 stránky)
Počítačový hardware Asus P5LD-MR Uživatelský manuál
(160 stránky)
(160 stránky)
Počítačový hardware Asus ASWM Enterprise System Web-based Management Uživatelský manuál
(78 stránky)
(78 stránky)
Počítačový hardware Asus TS100-E6/PI4 Uživatelský manuál
(148 stránky)
(148 stránky)
Počítačový hardware Asus RS100-E8-PI2 Uživatelský manuál
(158 stránky)
(158 stránky)
Počítačový hardware Asus ASWM Enterprise System Web-based Management Uživatelský manuál
(94 stránky)
(94 stránky)
Počítačový hardware Asus Hummingbird Uživatelský manuál
(112 stránky)
(112 stránky)
Počítačový hardware Asus NCCH-DLE Uživatelský manuál
(180 stránky)
(180 stránky)
Počítačový hardware Asus RS160-E2 Uživatelský manuál
(132 stránky)
(132 stránky)
Počítačový hardware Asus RS700-X7/PS4 Uživatelský manuál
(182 stránky)
(182 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.036 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce